油壓機具 JTC-JL9511 立式油壓彈簧壓臺 @% twJTC-JL9511
油壓機具 JTC-JL9511 立式油壓彈簧壓臺 @% twJTC-JL9511
• Special design to use for most cars.
• First, check the spring angle and choose the A, B, C clamp.
• Assemble clamp on "a" and "b" fasten holder.
• Then turn "c" turning wheel of "a" fastener holder, adjust to the proper position and then
put adjust clamp on shock absorber to completely press spring will do.
• To lock tightly "d" hydraulic valve and shake up and down for "e" hydraulic operating rod.
Then hydraulic spring will move "b" clamp to fasten seat up to your proper height position.
And then you can disassemble the shock absorber.
• After dismantling and changing the shock absorber, to release slowly "d", and then "b" will l
ower to original position.
• Contents:Clamp A.B.C
油壓機具jtc-jl9511立式油壓彈簧壓臺twjtc-jl9511 %
油壓機具jtc-jl9511立式油壓彈簧壓臺twjtc-jl9511 %
•特別設計用于大部分的車。
•第一，檢查彈簧角和選擇A，B，C夾。
•裝配夾具上的“A”和“B”的緊固夾。
•然后打開“C”“”扣架轉向輪，調整到合適的位置，然后
把調整減震器夾完全壓簧會做的。
•鎖緊“D”液壓閥和上下搖動的“E”液壓操縱桿。
然后液壓彈簧將“B”夾系安全到您的適當高度位置。
然后你可以拆卸減震器。
•拆除和更換減震器后，緩慢釋放的“D”，然后“B”將L
它原來的位置。
•內容：夾ABC | 
您的位置：
銀行匯款